Short answer: the lowest published robot height in this chart is 79.5 mm (3.13 in), and none of the 59 models lists a height under 3 inches. The middle model is about 97.5 mm (3.8 in). Use the chart to shortlist, then check the maker’s page for your exact variant before you buy.

Search the table by model, filter by brand, or type the lowest gap under your sofa or bed to mark rows whose published height is lower. Heights, dock sizes, threshold climbs and mop lifts are all copied from the maker’s page linked in each row. When a maker does not publish a number, the cell is blank. Nothing here comes from our own measuring or testing.

How to read the heights

Makers do not all state the same thing. Some give one height and do not say whether it includes the laser sensor on top. Others give two: a lower figure with the sensor retracted and a higher figure with it raised. The “Which height” column says which one each row shows. A retractable sensor only lowers the robot when it is allowed to retract, so keep a reserve above the published figure. The clearance worksheet shows how to do the arithmetic with your own measurements, and the threshold footnotes guide explains the conditions behind climb claims.

Dock sizes

Dock sizes are shown in the order and with the axis names each maker uses. Where the maker does not name the axes, the chart does not guess which number is width and which is depth. Maker-stated installation clearances (for example Roborock’s space guidance for the Saros 10R dock, or eufy’s height recommendation for the X10 Pro Omni station) appear in the dock cell only where the maker’s page states them.

Method and limits

  • Each value was read on the maker’s page and then checked again against the live page on November 8, 2026. Rows that did not match were dropped.
  • Inch values are converted at 25.4 mm per inch and marked with an asterisk. Everything else is as printed.
  • Where one maker page disagrees with another page from the same maker, the row says so in its note.
  • Threshold climbs and mop lifts are the makers’ own test claims, made under their conditions. They are not a promise for your doorway.
  • Covered so far: Roborock, Dreame, Ecovacs, iRobot, eufy and Tapo. Narwal pages did not show specifications to a plain page fetch, and Shark’s site refused automated requests, so those brands are not covered yet. They will be added from the makers’ manuals.
  • Some models are sold in several variants and regions. Confirm the exact model number on the box.

Sources

Every row links to its own maker page in the table. Brands covered: Roborock, Dreame, Ecovacs, iRobot, eufy and Tapo.

See also the turret versus body height note built from the same rows.